| 是否进口：否 | 产地：上海 | 品牌：魁昂牌 |
| 型号：HB-YD888(Q) | 焊芯直径：1.2mm | 订货号：45212 |
| 货号：45212 | 牌号：HB-YD888(Q) | 类型：堆焊焊条 |
| 材质：合金 | 药皮性质：碱性焊条 | 直径：1.2mm |
| 长度：1000mm | 焊接电流：80-130A | 电流幅度：220A |
| 熔点：220 | 工作温度：220℃ | 适用范围：广泛 |
| 硬度HRC：标准 | 是否跨境货源：否 |
HB-YD888(Q)高硬度耐磨药芯焊丝
HB-YD114(Q) | 1.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝，受强烈冲击后，表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD115(Q) | 1.6 | 50-55 (受强烈冲击后After high impact) | 用于受严重冲击高锰钢堆焊，加工硬化***。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD165(Q) | 1.6 | 60-65 | 高硬度耐磨焊丝，适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD172(Q) | 1.6 | ≥40 | 用于堆焊齿轮、挖泥斗、矿山机械等磨损件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. |
HB-YD207(Q) | 1.6 | ≥50 | 用于堆焊推土机刀片，螺旋桨等磨损零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. |
HB-YD212(Q) | 1.2/1.6 | ≥50 | 用于堆焊各种受磨损的机件表面，如齿轮、挖斗、矿山机械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. |
HB-YD256(Q) | 1.6 | HB≥170 | 高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊 High-manganese steelhardfacing flux-cored Wires,it is applied to repair surface of high impact wear parts, such as Crusher. |
HB-YD258(Q) | 1.6 | 55-60 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD265(Q) | 1.6 | 60-65 | 高硬度耐磨焊丝，适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD322(Q) | 1.6 | ≥55 | 用于堆焊各种冲模及切削刃具，兼用于修复要求耐磨损性能较高之机械零件 Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery. |
HB-YD327A(Q) | 1.6 | ≥55 | 专门用于模具堆焊，耐磨性能高于D322 Used tomouldsurfacing, wear resistance is better than D322. |
HB-YD337(Q) | 1.6 | ≥48 | 用于铸钢或锻钢上堆焊锻模 Applied to repairforging dieatcast steelorforging steel. |
HB-YD397(Q) | 1.6 | ≥40 | 用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件 Applied to repair hotforging dieatcast steelor forging steel, or highstrengthwear surfacing. |
HB-YD405A(Q) | 1.6 | 50-59 | 用于热轧辊开坯辊堆焊 Applied to repair hot-rolling blooming rollor. |
HB-YD430A(Q) | 1.6 | 20-35 | 打底层堆焊焊丝 A backing hardfacing flux-cored Wires |
HB-YD488A(Q) | 1.6 | 45-50 | 用于轧辊堆焊 Applied to repair rollor |
HB-YD507Mo(Q) | 1.6 | 35-45 | 用于510℃以下中高压阀门堆焊 Applied to valve which operating tdivperature is less than 510℃. |
HB-YD518(Q) | 1.6 | 40-50 | 用于连铸辊堆焊 Applied to repaircontinuous caster roller |
HB-YD688(Q) | 1.6 | 50-60 | 用于磨煤辊打底焊(韧性好，可以多层堆焊) Used to coal roller backing welding. |
HB-YD788(Q) | 1.6 | 55-62 | 硬度高，可以多层堆焊。 High hardness andmulti-layer welding |
HB-YD888(Q) | 1.2, 1.6 | 60-65 | 硬度高，堆焊层厚度不超过6mm。 High hardness, but thethicknessofsurfacing layeris less than 6mm. |
HB-YD888Ni(Q) | 1.2 | 58-65 | 高铬合金焊丝，用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD988(Q) | 1.6 | 55-63 | 高铬合金焊丝，用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD990(Q) | 1.6 | 55-65 | 用于高温耐磨堆焊。 Applied to repair surface ofhigh tdivperaturewear parts. |
HB-YD58(Q) | 1.6 | 55-60 | 高温耐磨焊丝，用于化推焦机磨靴的堆焊。 high tdivperaturewear hardfacing wires, |
HB-YD67(Q) | 1.6 | 58-63 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD95(Q) | 1.6 | 55-63 | 高铬合金焊丝，用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-DG7(Q) | 1.6 | 52-60 | 地铁盾构施工刀具刃口堆焊专用，也可用于煤碳石装载机料斗和刃口堆焊修复。 Applied to repair surface of high impact wear parts, such as shiled machine, excavator bu |
